How to Apply Vinyl to an Ornament without Bumps | FREE SVG

Are you tired of all those bumps you get in your vinyl when applying it to ornaments? I’m sharing my tips and tricks for smooth gorgeous vinyl decals on ornaments.

I recently made 125 ornaments for a school event. I got really good at applying the vinyl with no bumps. What I learned was you need to be very strategic about your approach and execution. I’ll share what I learned with you and I’m throwing in a free music SVG so you can follow along if you wish.

Tutorial Video

Watch for a step by step tutorial. Prefer written instructions, keep reading.

Selecting the Correct Materials

Ornaments

In order to set yourself up for success, start with the correct materials. Whenever I add vinyl to an ornament I always select a disc shaped ornament and not a round ornament. It’s incredibly difficult to have success with getting vinyl to lay flat on a sphere. The disc shaped ornaments are much easier to work with.

Want to paint your ornament? See How to Paint the Inside of a Clear Ornament

Vinyl

Make sure you are using a good quality permanent vinyl. Some vinyls get more air bubbles and are harder to work with. I love Teckwrap for my ornaments. I think their vinyls are a little thicker, so I never seem to get air bubbles when I use that brand. Less air bubbles also means that it’s easier to smooth down the vinyl on the ornament and get the bumps out.

Decal / Design

You also want to pick out a design that’s easy to work with. The smaller your design in relation to the size of your ornament, the better. It’s hard to apply one large piece over a curved surface. In a lot of cases (especially with the sphere ornaments) it’s impossible to do it smoothly.

Also the less connected your design is, the better. For example, I am using this design below. I’m also giving it away as a FREE SVG file in case you would like to follow along. This design has a larger piece (the clef) which will be trickier to apply, but the little pieces around it that aren’t connected to the clef will be super simple.

So pick wisely. If you want to apply a large solid thick decal to a round ornament, it’s pretty much impossible to get it to lay flat.

Preparation

Before we get into applying the vinyl, let’s make sure we are set up for success.

Cleaning the Surface of the Ornament

Like an other blank that you apply a vinyl decal to, you will want to prep it by cleaning it with alcohol. This cleans the dirt and oils off of the ornament and gives your vinyl the best chance of sticking.

Prepare Your Decal

Cut and weed your decal.

Select the Correct Transfer Tape

After you have done that, select your transfer tape carefully. I started out with a low tack transfer tape and since my vinyl has a little bit of texture on it, it didn’t work well. My vinyl was staying on it’s backing.

So, I immediately jumped to strong grip transfer tape which is what I use for glitter vinyl. The vinyl stuck to it very well, but it made it very difficult to apply the vinyl to the ornament. It kept sticking and forcing the vinyl down before I was ready.

Then, I remembered I had some medium grip transfer tape and like Goldilocks, it was just right. Your transfer tape can make a huge difference in the success of your ornament.

Application

Now we are ready to apply the vinyl decal to the ornament.

Cutting Slits in the Transfer Tape

Before you put it on the ornament, you must cut slits in the transfer tape. For this decal I cut slits around every individual piece of the decal.

Think of it as giving your decal more flexibility and wiggle room.

Be careful not to cut the actual vinyl.

Apply the Vinyl

Once the slits are cut, apply the vinyl to the ornament. Here is where you want to decide where you are strategically going to push the vinyl down first.

I have already identified the clef as my hardest part, so I’m going to pick the most difficult part of the clef and press down there starting in the center and working my way towards the outside. In this case, it’s the widest part of the the clef.

Once that is done, go to the top of the clef and you can pull the transfer tape up and out a little. Pull the tape tight and apply it so the vinyl is smooth against the ornament.

I then do this to the bottom of the clef and each individual element of the decal. The slits make this possible to do. So pull tight and press down for each piece / section.

Remove the Transfer Tape

Since you cut the transfer tape, it will come off in pieces. Be careful when removing that you don’t pull the vinyl up.

Finishing Touches

Take a look at your gorgeous decal. If there are any bumps (and there might be some). Smooth them out with your finger. Since we started strategically in the center and worked our way out they are easy to work out. After you smooth them you can also blast it with a little heat from the hairdryer. Just not too high that you would melt anything.

Enjoy your gorgeous, smooth, custom ornament this Christmas!

Get The File

This post may contain Amazon or other affiliate links. If you purchase something through the link, I may receive a small commission at no extra charge to you. I only promote items I personally use and love.

In This Tutorial